|
The zero-turn mower is the backbone of any mowing operation. If you’re looking forward to what’s new in the zero-turn mower world for 2011 or if you missed what came out in 2010, we’ve got you covered. Here are some of the latest innovations and updates from mower manufacturers.
To submit new product information for inclusion in an upcoming issue of Lawn & Landscape, send your information to Editor Chuck Bowen at cbowen@gie.net.
BOB-CAT 2011 commercial zero-turn riding mower line
- Tank and fuel system meet EPA compliance without loss of fuel cap and without sacrificing fuel capacity.
- ISO-Ride comfort system – Elastomeric bearings isolates operator from vibration at all touch points.
- Custom fit seating with easy-to-locate and -adjust controls. Increased legroom, a foot assist lift pedal that can quickly be mounted on the left or the right side for user preference and an ergonomic lower profile allows for operator height versatility.
- A 20 percent or larger discharge opening, depending on model.
- Works in unison with a blade tip speed of 18,500 fpm, creating lift that cuts grass evenly and discharges at a higher volume to eliminate wet grass clumping and clogging under mower deck.
Contact: www.bobcatturf.com
Cub Cadet’s Z-Force S commercial zero-turn rider
- Synchro Steer technology – four-wheel steering system that controls both the front wheels and the independently controlled back wheels.
- Replaces lap bars with a steering wheel and offers steerable front wheels for increased stability and control.
- Either a 22- or 25-hp Kohler Command V-Twin engine, both aimed at reducing cutting time while offering ground speeds of up to 8.5 mph.
- Fabricated, slope-nose cutting deck available in either 48- or 60-inch widths.
Contact: www.cubcadet.com
Dixie Chopper – The Dominator
- Four-wheel drive.
- Interchangeable connection for the attachments.
- 33-hp Generac gasoline engine.
- Custom front-end mechanism raises and lowers mower’s front casters, allowing The Dominator to operate on four full-size wheels with four wheel motors when the casters are in the up position.
Contact: www.dixiechopper.com
Dixon DX series
- The DX 161 has the option of a 28-hp Briggs & Stratton Commercial Turf engine featuring 810cc displacement.
- The DX200 series has an integrated 16cc ZT5400 Hydrostatic transmission, offers ground speeds up to 12 mph and helps minimize maintenance by reducing potential leak points.
- The series also offers deck options of 54, 60 and 72 inches and Kawasaki FX series engine choices of 26-, 29- and 34-hp.
- The DX260D features a 29-hp Kubota diesel, 21cc pump and motor drive system and is only available in the 60-inch model.
Contact: www.dixon-ztr.com
Exmark Pioneer S-Series
- Equipped with full-floating 44-, 48- or 52-inch Triadvantage deck cutting technology.
- Kawasaki V-Twin engines of 20-, 22- or 24-hp for speeds up to 8 mph moving forward and 5 mph in reverse.
- 22 x 9.5 – 12 Turf Master drive tires.
Exmark Vantage
- Features an ergonomically designed steering system and self-compensating suspension to make standing more comfortable for the operator.
- Powered by an 18- to 24-hp Kawasaki V-Twin or 25-hp Kohler Command Electronic Fuel Injection Pro V-Twin engine.
- 52-inch UltraCut Series 4 cutting deck.
- Speeds up to 8 mph forward and 4 mph reverse.
- Adjustable platform for mowing hill sides and fold up ability allowing for walk-behind functionality.
Contact: www.exmark.com
Ferris Evolution Line-up
- Two years after introduction, Evolution has five models.
- Available from 19- to 27-hp with forward speed up to 10 mph.
- 36-, 48- or 52-inch mowing decks.
- For mowing in tight places or highly landscaped areas.
IS 2500Z Line-up
- 3-cylinder, in-line diesel engines with cast iron blocks.
- A 20-hp model with 52-inch iCD cutting system, 24-hp model with 61-inch iCD cutting system and 24-hp model with 52-inch iCD cutting system.
- Four-wheel suspension.
Contact: www.ferrisindustries.com
Grasshopper
- FrontMount models with the T6 and G2 drive systems feature standard QuikAdjust Tilt steering levers with a 9-inch adjustment range.
- A new winter enclosure for use with snow removal implements on 700 and 900 Series FrontMount models, also features contoured styling with doors on both sides and is pre-wired for installation of optional lights, heater and wiper.
- MidMount model 226V equipped with a 26-hp Professional Series V-Twin engine.
- Parker commercial-grade pump and wheel motor drive system offers heavy load bearing capability with CoolTemp HydroMax hydro fluid and filtration.
- Robotically-welded and fabricated 5-1/2-inch-deep cutting decks provide wide-pattern side discharge with optional mulch and PowerVac capability.
Contact: www.grasshoppermower.com
Gravely Pro-Ride mowers
- Features a high volume tunnel deck suited for mowing tall, thick, or wet grass.
- Made of heavy-duty 7-gauge welding construction, the tunnel deck features a 149-square-inch discharge opening, overlapping blades and baffle-free front design.
- The Pro-Ride features a 66-inch deck with a 31-hp Kawasaki FX engine and is also available with a 54- or 60-inch deck and a 27-hp Kawasaki FX engine.
The ZT42 zero-turn mower
- Delivers with its 12-gauge, stamped steel XLerator Deck.
- The newly-designed handle. bars are a one-piece cushioned, fully tubular design that can be adjusted in three different directions to ensure a comfortable fit for any size operator.
- Features a 42-inch cutting deck and a 22-hp Kawasaki V-Twin engine.
Contact: www.gravely.com
The Husqvarna P-ZT
- Heavy-duty chassis, 1/4-inch thick cutting deck and heavy-duty spindles.
- Integrated transmission reduces chance of parts being exposed to the elements by enclosing them in an easily accessible area under the seat.
- Kawasaki and Briggs & Stratton engines, ZT3400 transmissions and land speeds up to 9 mph.
Contact: www.husqvarna.com/us
Hustler X-ONE
- 48-, 54- and 60-inch side discharge decks with VX4 technology and 54-inch or 60-inch rear discharge decks.
- Up to 31 hp and 11 mph.
- Separate pumps and motors.
- Heavy-duty air cleaner for increased engine protection.
Hustler Super Z
- 60-, 66-, or 72-inch side discharge deep deck with VX4 technology and 60- or 72-inch rear discharge.
- Kohler or Kawasaki engines up to 37 mph.
- Industrial grade pumps and motors.
- SmoothTrak Steering for responsive precise control.
Contact: www.hustlerturf.com
John Deere Z700 ZTrack Series
- 7-Iron II mower deck with mowing speeds up to 10 mph.
- 400-pound towing capacity.
- Pneumatic front tires, high-back bucket seat with armrests and rollover protect structure and easy-grip turning height-of-cut adjustment for improved comfort and convenience.
- Less expensive and fewer features than ZTrack PRO Series.
Contact: www.deere.com
Scag Cheetah
- Two-speed heavy-duty hydraulic drive system.
- Adjustable operator suspension system.
- 61-inch or 72-inch Velocity Plus cutter deck.
- Ground speeds up to 16 mph.
Contact: www.scag.com
Snapper Pro – S75x
- 20- or 26-hp Kawasaki engine and industrial two-stage air cleaner.
- Individual hydro-gear pumps and wheel motors.
- iCD cutting system with 52-inch deck.
- 10 mph ground speed.
Contact: www.snapperpro.com
Toro Z Master G3 propane-powered mowers
- Offers ground speeds up to 11.5 mph.
- Single propane tank holds 43.5 lbs. of liquid propane mounted behind the seat.
- Propane-powered mowers have deck sizes of 60 or 72 inches.
- Similar benefits of the Z Master G3 series: height-of-cut system gives operators 1- to 5-1/2-inch cuts in 1/4-inch increments.
Contact: www.toro.com
Walker Super B Diesel Model MBSY
- Diesel option of the popular Super B.
- Fitted with Yanmar’s 23.6-hp “Minimax” engine.
- Meets Tier 4 exhaust emission regulations.
- Engine package includes an oversized, heavy duty radiator with self-cleaning fan and rubber isolation engine mounts.
Contact: www.walkermowers.com
Wright Commercial Products Stander X
- Combines a quick cut height adjustment and floating deck.
- Available with a 48-, 52- or 61-inch deck.
- Cut speed of 9.5 mph.
- Suspension platform provides a smoother ride.
- Open, unconfined design allows the operator to quickly step off.
Contact: www.wrightmfg.com
|
