Withstand snowfall

BOSS Snowplow Mid-Sized UTV Plow

The pitch: Designed for mid-size UTV models including the Polaris RZR and Yamaha Rhino, the new five foot UTV Plow from BOSS Snowplow features fully hydraulic operation.

• BOSS offers a high blade lift height available for snow stacking capability.
• The plow blade skin is made from rust-resistant poly for crack resistance and slickness.
• A sloped-profile undercarriage provides ground clearance.
   

For more information: www.bossplow.com

CASE Snow Removal Package

The pitch: CASE Construction Equipment has released a new Snow Removal Package for the company's SR250 and SV300 skid steers.

• The new Snow Removal Package includes high-flow auxiliary hydraulics that provide up to 37.6 gallons per minute (gpm) for use with snow blowers and brushes. It comes with hydraulic self-leveling and Ride Control.
• The new package includes an enclosed cab and a heated air-ride suspension seat. It also comes with a block heater to assist in cold starts, and a 4-corner LED strobe kit and heavy-duty lighting package/side lamp kit.
• The package also has a heavy-duty rear door and hydraulic couplers.
   

For more information: www.CASEce.com

Henke Manufacturing HXC2000 Spreader

The pitch: Henke’s new HXC2000 Spreader features a removable conveying cartridge.

• The replaceable cartridge allows users to choose between an auger, dual auger, pintle chain or belt conveyor.
• Standard features of the HXC2000 include: fully replaceable conveyor cartridge, remote chain tensioning, wide base rails and conveyor for more consistent spread and minimizing of material bridging.
• The spreader also features No Tool adjustment spinner deflectors, telescoping discharge chute for even high flow rates, spinner drive “shed” design to prevent clogging and fouling in the chute and safety features allowing tool free access for routine maintenance.
   

For more information: www.henkemfg.com

Hiniker Company Model 775

The pitch: Hiniker’s Model 775 dual-motor electric auger spreader allows users to tailor material ice control application rates accurately and conveniently.

• A 5.75 inch diameter auger delivery system provides positive delivery control with no material carry-back into the truck bed. The spreader is sized for either a 6.5 foot or eight foot pickup.
• An in-cab console provides individual variable speed control for both the conveyor and the spinner, along with blast and reversing functions. Dual 12-volt motors offer quiet, low-maintenance operation.
• The spreader's standard hopper capacity is two cubic yards. A tip-up spinner assembly is desined to make unloading unused material simple and provides trailer hitch access.
   

For more information: www.hiniker.com

SnowWolf Ultra Series Blades

The pitch: SnowWolf’s Ultra Series blades come in five widths ranging from six to 10 feet and attach easily to small or large skid-steers and utility loaders that range from 4,000 to 14,000 pounds.

• With the 35-degree plowing angle and tight moldboard curvature, snow rolls off of these blades easily, and they save fuel because they require less horsepower to push.
• The blades can oscillate up to six inches to adjust to the contours of plowing surfaces and evenly wear the cutting edges.
• Each Ultra Series blade also features a 9 inch trip edge that eliminates false tripping that is common with full-trip style plows. This allows operators to plow through changing snow depths and consistencies.
   

For more information: www.snowwolfplows.com

SnowEx SP-1675 Precision Pro

The pitch: SnowEx’s new SP-1675 Precision Pro spreader has the ability to spread any bulk or bagged ice melting material from four to 12 feet wide. It is is offered with three mounting systems for attaching to three-point hitches, utility vehicles or 2-inch receiver hitches.

• The unit is designed to accommodate varying sidewalk widths, which cannot be easily treated with drop spreaders.
• The spreader has a six cubic foot capacity. A volumetric vane feed system provides consistent material flow to the spinner, while eliminating the need for a gate, since no material can leak out when the spreader is turned off.
• The spreader comes with a lightweight, corrosion-resistant polyethylene hopper, which requires little maintenance. The electric drive system further reduces maintenance needs, since there are no engines, chains or sprockets to service.
   

For more information: www.snowexproducts.com