On full display

Canycom USA

The Canycom CMX1402 Ride-on Brush Cutter is a 4WD brush cutter that features large tires for added traction on slopes and wet ground. It is equipped with a Subaru EX40DS gasoline engine and a hydrostatic drive system.

The adjustable cutter deck is shaft driven and requires no belts or pulleys.

Learn more about Canycom USA’s new brush-cutter at booth #9220.

BWise Manufacturing

The newest BWise model, the Multi-Tasker, has a capacity of 18.5 cubic yards. The system features a Hyjacker 10,000-pound hydraulic jack. A multi-function wireless remote is also included.

A standard flat-bed can be attached for use as a delivery platform and a tilt bed is also available. The system is manufactured with a 5” cylinder and hoist and utilizes a chain drive to power the deck or roll-off on and off the trail.

Also available as a gooseneck, the Multi-Tasker is built with 8” tube frame construction.

Visit BWise at booth #11198.

Carrier Systems

Carrier Systems’ new 360-degree trailers are made with high-quality steel for durability and are available in multiple models for different sized applications.

Single and double-axle trailers are available in multiple sizes and feature a swivel wheel design to prevent jackknifing.

The ramps and floorplates are sprayed with an abrasive coating for a better grip. The trailers fit any class four or five two or two and a half-inch receiver and have adjustable ramps to fit any wheel base or (10 ply) tire size.

Visit Carrier Systems at booth #362 to learn more.

Arborsystems

Retriever Insecticide is the newest direct-inject chemical product from ArborSystems for use in the Wedgle Direct-Inject Tree Injection System. Retriever Insecticide is available in 120 ml and 1000 ml Quick-Connect Chemical Packs.

It is for tree injection application to ornamental or non-bearing fruit and nut trees. Retriever contains the active ingredient Acetamiprid and is formulated to translocate in the tree’s vascular system when injected.

Visit booth #6013 to see the new insecticide on display.

EFC International

The Ratchet P Clamp is heat- and UV-stabilized with PA66 plastic for durability. The contoured clamp is designed to guide and center bundle to reduce pinching. The ratchet closure is one piece and features a one-touch close.

The mounting plates, made from high quality steel, are treated to resist chemical and salt sprays and are available in a variety of lengths and orientations. An integrated cable tie saddle provides an additional fixing point.

Visit booth #10018 to learn more about EFC International’s products.

Gardeningdrop

The DanceFlower rotary sprinkler features a flower design that sprays in all directions. The sprinkler has a 16-foot radius and flows up to 132 gallons of water an hour.

A steel tip bolsters the sprinkler into the ground.

Visit Gardeningdrop at booth #23106 to check out the sprinkler.

Worx

The new 20-volt max 4.0 Ah battery features twice the run time of the Worx 20V 2.0 Ah battery. The compact battery weighs 1.5 pounds and is compatible with all Worx 20V lawn and garden and DIY tools.

The battery features a built-in fuel gauge. Users can monitor charge levels by pressing an electronic keypad that signals the battery’s charge status. When charging the 4.0 Ah battery, a conventional Worx 20V charger takes up to five hours.

Visit Worx at booth #1164.

Greenworks

The 82V Brushless Pole Saw is a commercial-grade saw with a brushless motor and added torque. The 3-piece shaft is made of aluminum alloy and can extend from 8 feet to 12 feet while an auto oiler helps keep the adjustable chain lubricated.

Other features include a 27-degree angled head and a range of 105 to 240 cuts per charge. The battery operation reduces noise and emissions. It is available for use with 2.5Ah, 4.0Ah and 5.0Ah batteries.

Check out the Greenworks product lineup at booth #11192.

ODES UTVs

Limited edition Dominator X model UTVs offer users 90 different customizations. Customization includes the class, engine size, the carbon fiber plastics color, and coated metal frames and roll cage.

Standard features include travel suspension, custom body wrap graphics, and Zeus Touch, a 7 LCD full-color touch screen that includes GPS. It includes all digital gauges, fault notifications, push notifications, blue tooth capabilities, GPS location, way point tracking to track your rides and routes, and additional abilities for audio upgrades.

Learn more about ODES UTVs at booth #3156.

Champion

POWERX2 Full Synthetic 2-Cycle Oil with ethanol protection and fuel stabilizer is designed for 2-Stroke and 4-Mix engines.

It is designed specifically to protect equipment and maximize the life of engines, exhaust systems and spark plugs and productivity. The formula protects against phase separation and corrosion and reduces deposits in 2-stroke and 4-mix engines.

Learn more about Champion products at booth #4020.

warming trends

Warming Trends’ patent-pending CROSSFIRE Brass Burner utilizes cutting-edge technology to create a taller, brighter, fuller flame. It can make twice the flame with half the gas. The patent-pending technology behind the CROSSFIRE Brass Burner uses a specific air-to-gas ratio at the point of combustion to produce a taller, brighter, fuller flame that resembles a natural wood burning fire. Venturi Jet Technology generates high velocity gas flow and pulls more oxygen into the jet chamber – feeding the combination into the flame at the point of combustion. This causes the gas and oxygen mixture to shoot out of the jet at a high velocity as a super-charged flame, like water out of a fire hose. It’s made in the USA and has a lifetime warranty.