Arborwear Tech Pullover Sweatshirt
![](/fileuploads/publications/1/issues/103415/articles/images/Arborwear_Tech_Double_Thick_Class_3_Pullover_Sweatshirt_fmt.png)
The pitch: This heavy-duty sweatshirt help keeps you safe on the job by keeping you warm, comfortable and visible at the same time.
- The safety-conscious sweatshirt is made from two layers of 9-ounce, 100 percent polyester fabric in high visibility yellow and features 3M stretch reflective tape to meet ANSI/ISEA 107–2015 standards.
- The Teflon fabric protector repels most water and oil-based liquids.
- It includes an oversized, three-piece, helmet-compatible hood with snap neck closure to help keep out the elements while you work outdoors.
For more information: Arborwear.com
3M WorkTunes
![](/fileuploads/image/2018/11/21/90543-4DC_CFIP_CMYK.tif_fmt.png)
The pitch: These ear-protective headphones allow you to stream the entertainment of your choice from your smartphone or
- The headphones feature a noise reduction rating of 24 decibels.
- The integrated microphone lets you make and take phone calls without removing the ear protection.
- 3M Worktunes headphones are equipped with Bluetooth technology to connect with Bluetooth-enabled devices.
For more information: 3M.com
Husqvarna Arborist Helmets
![](/fileuploads/publications/1/issues/103415/articles/images/Husqvarna_Spire_Helmet_fmt.png)
The pitch: The new line of arborist helmets is designed for the professional arborist looking for comfort, safety
- The helmets come as Class C or Class E variations, depending on if the user is working near power lines, and three different visor versions: clear, mirror and smoke.
- Both helmets meet ANSI and CSA requirements, are ventilated and come with universal fit and depth adjustment settings.
- Husqvarna Elevation – Class C Arborist Helmet and Husqvarna Spire – Class E Arborist Helmet are available.
For more information: Husqvarna.com
ECHO Shin Guards
![](/fileuploads/publications/1/issues/103415/articles/images/shinguards_400x400_fmt.png)
The pitch: ECHO’s pair of brush protection shin guards offers a solution for users who face dense trimming or brush-cutting environments.
- Lightweight in design, they feature padded shins that protect against yard debris and equipment contact. The shin guards also feature easy touch fastener strap closures for on-and-off access.
- They are easily cleaned for efficiency and their water-resistant feature will ensure users are not bogged down with extra weight in high moisture grass or brush.
- Exact measurements are 18 inches high and 9 inches wide. The shin guards fit up to a 23-inch calf circumference.
For more information: Echo-usa.com
![December 2018](/fileuploads/publications/1/issues/103415/DecemberCoverDigital.jpg)
Explore the December 2018 Issue
Check out more from this issue and find you next story to read.